Cleaning; Lubrication; Lubrication Frequency; 3-3-2 Types Of Lubricant - Citizen CL-S400DT Technical Manual

Chapter 3 Disassembly and Maintenance
3-2 Cleaning, 3-3 Lubrication

3-2. Cleaning

Cleaning spots are listed below.
Cleaning Position
Cabinet
Thermal head
Platen
Media running surface
("SA, Platen")
Clean inside the printer in accordance with the following:
• Cleaning frequency: Every 6 months or 300 hours of operation. (Whichever comes first)
• Materials:

3-3. Lubrication

3-3-1. Lubrication frequency

This is a maintenance-free machine and requires no lubrication under normal use. However,
the machine should be lubricated whenever it is disassembled and reassembled, or when
lubricated parts are cleaned.
The parts to be lubricated are indicated in the disassemble procedure with the mark
3-3-2. Types of lubricant
• Floil G-311S (by Kanto Chemical Co., Ltd.)
• HANARL UD-24 (by Kanto Chemical Co., Ltd.)
• SANKOL ZZG-1001 (by SANKEIKAGAKU Co., Ltd.)

3-3-3. Quantity of lubricant

Small quantity..........
Ordinary quantity ....
Large quantity..........
CL-S400DT
Wipe soiled parts of the printer with a clean dry cloth. Remove bits
of media, etc., using tweezers.
Note: When cleaning, be careful not to scratch the equipment or to
bend parts, etc.
Clean the thermal head with the head cleaner only.
Head cleaner is separately available.
Clean the platen with a soft cloth.
Wipe off media refuse, etc., on and around the media running
surface.
Dry cloth (gauze or soft cloth) and thermal head cleaner
............. About 1 drop.
......... About 3 to 4 drops.
About 0.2 mm thick for grease.
....... Apply sufficiently.
Description
3-4
.