1. Manuals
  2. Brands
  3. Citizen Manuals
  4. Barcode Reader
  5. CL-E700 Series
  6. User manual

Citizen PEELER CL-E700 series User Manual

Hide thumbs Also See for PEELER CL-E700 series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Technical Manual, User Manual
PEELER
USER'S MANUAL
For CL-E700 Series

Advertisement

Table of Contents
loading

Related Manuals for Citizen PEELER CL-E700 series

Summary of Contents for Citizen PEELER CL-E700 series

  • Page 1 PEELER USER’S MANUAL For CL-E700 Series...

  • Page 2: Table Of Contents

    Initial value of peeling position ........I-8 Peeler commands .............I-9 CITIZEN is a registered trademark of CITIZEN WATCH CO., Japan. CITIZEN es una marca registrada de CITIZEN WATCH CO., Japón. Company names and product names in this manual are trademarks or registered trademarks of relevant companies.

  • Page 3: Caution

    CAUTION z Always use the peeler with the door closed except when the media is loaded into the peeler. z Do not push down the door roughly when it is opened, which may cause damage to the hinge of the door. z Use the media that meets standard requirements.

  • Page 4: Function

    1 Function This peeler unit is designed to automatically remove the label from the liner. 1-1 Exterior view and part names Peeling Roller Top view of door opened Idle Roller (upper) Friction Roller (lower) Door Top view Peeling Sensor Front view Release Knob Side view I –...

  • Page 5: Main Specifications Of Peeler

    2 Main specifications of peeler Width of liner (a) : 25.4 – 118 mm (1 – 4.65 in) Minimum length of label (b) : 25.4 mm (1 in) Label: fine media/Thickness: 0.09 mm (0.0035 in) (including glue layer)/Rolled inwards Maximum length of label : Approx.

  • Page 6: Checking Items Inside The Accessory Box

    3 Checking items inside the accessory box You should check that all of the following items are inside the accessory box. If any are missing, please contact your supplier. PEELER ...............................1 piece Screws ..............................2 pieces Installation Guide ..........................1 piece User’s Manual ..........................1 piece Installation Guide PEELER Screw (2)

  • Page 7: Peeler Setting

    4 Peeler setting 4-1 Peeler door opening/closing 1 Opening Shift the release knob of the peeler to the left with the finger, and the peeler door will open. 2 Closing Push down the left end of the peeler door until it clicks closed. 4-2 Media loading 1 First peel off the labels with a length of 12 cm (5 inch) or more on the top of the loading media, then load the media into the peeler where the first label comes to...

  • Page 8: Initial Value Of Peeling Position

    5 Initial value of peeling position If the peeler function is selected when the power is turned on or the resetting is performed, the media will automatically feed from the reference point to the peeling position (by initial value of feeding amount), regardless of printer emulation. To finely adjust the peeling position, transmit the command STX f or STX Kf from the host computer to the printer.

  • Page 9: Peeler Commands

    6 Peeler commands The following are the peeler commands. For details of each command, see the separate Command Reference. Peeling position designated command STX f, STX Kf This command designates the feeding amount from the reference point to the peeling position.
  • Page 10 363 Van Ness Way, Suite 404 Torrance, CA 90501. USA Tel: (310) 781-1460 Fax: (310) 781-9152 http://www.citizen-systems.com Otto-Hirsch-Brücken 17 Elizabeth House, 56-60 London Road 70329 Stuttgart Staines-Upon-Thames, TW18 4HF Germany United Kingdom Tel: +49 (0) 711 49032-0 Tel: +44 (0) 20 8893 1900...

Table of Contents