Important Safety Instructions
(Save These Instructions)
User Safety Precautions
Prior to use:
• Obtain a medical exam before beginning any exercise program.
• Obtain instruction before using.
•
Read and understand warning labels.
• Keep foot plate surface clean and dry.
• Maximum user weight is 400 lbs. (180 kg).
• Inspect unit. If damaged, notify floor staff. DO NOT USE.
• Do not remove this label. Replace if damaged or illegible.
During use
• Do not use for stretching and do not attach straps or other devices.
• Do not allow children 12 or younger to be on or near machine.
• Stop exercise if feeling faint, dizzy, or have pain.
• Use the handrails for support and to maintain balance.
• Keep all body parts, clothing, and accessories, clear of moving parts.
• Wait until foot plates come to a complete stop before getting off.
Facility Safety Precautions
It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is
performed.
• Enforce all user and safety precautions.
• Read and understand the Owner's Manual completely before assembling, servicing or using unit.
• Verify all users are properly trained on using the equipment.
• Do not use unit outdoors.
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Chinese
Brazil
Page 5 of 95
GB 2099-1 and GB
1002-1
IEC-60320-C13
Need help?
Do you have a question about the 771A and is the answer not in the manual?
Questions and answers
Screen is frozen and won’t reset or go dormant pressing the cybex logo does nothing.
To reset a frozen CYBEX 771A screen, follow these steps:
1. Press and hold the Fan key for at least three seconds until the console beeps twice.
2. Release the Fan key and press the Volume Down key within two seconds.
3. The Incline and Resistance LEDs will blink, indicating Diagnostics Mode.
4. Press any Incline or Resistance key within ten seconds to stay in Diagnostic Mode.
5. If necessary, press the Stop key to exit to Dormant Mode.
If the issue persists, check for communication errors or a faulty membrane connection.
This answer is automatically generated