Table of Contents
Advertisement
Safety Guidelines and Practices
Read the Owner's Manual carefully before assembling, servicing, or using the equipment. Owner
must comply with all safety guidelines in this manual. It is also the owner's responsibility to instruct
users on the safe and proper operation of the equipment and to properly display any and all
warning labels and instructional placards. All users should read these labels and placards before
using equipment.
Power Cord Information
Power cord configuration
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K
Serious injury or death could occur if the following safety precautions and
instructions are not followed.
Shock and electrocution hazard.
• Connect unit to a grounded outlet.
• Do not use voltage adapter or extension cord.
Cybex is not responsible for injuries or damages as a result of cord or plug
modification.
• Verify voltage requirements of unit match local voltage requirements.
• Verify unit outlet is the same configuration as the plug.
Safety
115 VAC
Euro Plug
UK 230 VAC
Japanese
Danish
Australia
Page 4 of 95
NEMA 5-15
CEE 7/7
BS 1363
JIS 8303
107-2-D1
AS/NZS 3112
- Quick Links:
- 771A/772A
- Setup
- Testing Operation
- Console Display
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 771A and is the answer not in the manual?
Questions and answers
Screen is frozen and won’t reset or go dormant pressing the cybex logo does nothing.
To reset a frozen CYBEX 771A screen, follow these steps:
1. Press and hold the Fan key for at least three seconds until the console beeps twice.
2. Release the Fan key and press the Volume Down key within two seconds.
3. The Incline and Resistance LEDs will blink, indicating Diagnostics Mode.
4. Press any Incline or Resistance key within ten seconds to stay in Diagnostic Mode.
5. If necessary, press the Stop key to exit to Dormant Mode.
If the issue persists, check for communication errors or a faulty membrane connection.
This answer is automatically generated