Table of Contents
Advertisement
Resistance Range
Maximum User Weight
Power Rating
Options
Top View 771AT/772AT
Dimensions
1
2
Choosing and Preparing Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
• Adjacent units may share the free area.
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K
0 to 900 watts.
400 lbs. (180 kg).
Self powered or 100 - 240 VAC~, 50/60 Hz, 1.8A, 1-phase.
AC Power Adapter, Set Top Box wiring (to support CAB and MYE using
Coax or HDMI).
36.28" (92 cm)
76.25" (194 cm)
Page 12 of 95
- Quick Links:
- 771A/772A
- Setup
- Testing Operation
- Console Display
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 771A and is the answer not in the manual?
Questions and answers
Screen is frozen and won’t reset or go dormant pressing the cybex logo does nothing.
To reset a frozen CYBEX 771A screen, follow these steps:
1. Press and hold the Fan key for at least three seconds until the console beeps twice.
2. Release the Fan key and press the Volume Down key within two seconds.
3. The Incline and Resistance LEDs will blink, indicating Diagnostics Mode.
4. Press any Incline or Resistance key within ten seconds to stay in Diagnostic Mode.
5. If necessary, press the Stop key to exit to Dormant Mode.
If the issue persists, check for communication errors or a faulty membrane connection.
This answer is automatically generated