Table of Contents
Advertisement
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K
FCC Compliance Information
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.
Page 3 of 95
- Quick Links:
- 771A/772A
- Setup
- Testing Operation
- Console Display
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 771A and is the answer not in the manual?
Questions and answers
Screen is frozen and won’t reset or go dormant pressing the cybex logo does nothing.
To reset a frozen CYBEX 771A screen, follow these steps:
1. Press and hold the Fan key for at least three seconds until the console beeps twice.
2. Release the Fan key and press the Volume Down key within two seconds.
3. The Incline and Resistance LEDs will blink, indicating Diagnostics Mode.
4. Press any Incline or Resistance key within ten seconds to stay in Diagnostic Mode.
5. If necessary, press the Stop key to exit to Dormant Mode.
If the issue persists, check for communication errors or a faulty membrane connection.
This answer is automatically generated