Anybus CompactCom 40 Network Manual page 96

Host Application Objects
Extended Error Code
If the Error code equals FFh (Object specific error), the extended code will be translated as below:
Code Contents
01h Ownership
conflict
02h Invalid
configuration
• Connection Manager (06h), p. 33
• Message segmentation
Anybus CompactCom 40 EtherNet/IP Transparent Ethernet Network Guide
CIP no. CIP status code
01h Connection
failure
10h Device State
conflict
09h Bad attribute
data
(CIP object)
Additional Information
The configuration data was supplied in a forward open request.
The configuration data was supplied in a set request to the As-
sembly object.
CIP extended error code: Use value from MsgData[2 - 3]. The
extended error code shall only be used if the request originated
from a Forward Open request, not for explicit set requests.
94 (144)
SCM-1202-019-EN 1.6