Diagnostic Object (02H) - Anybus CompactCom 40 Network Manual

Anybus Module Objects
8.3

Diagnostic Object (02h)

Category
Basic
Object Description
This object provides a standardized way of handling host application events & diagnostics, and is
thoroughly described in the general Anybus CompactCom 40 Software Design Guide.
Supported Commands
Object:
Instance:
Object Attributes (Instance #0)
# Name
-
1... 4
11 Max no. of instances
12 Supported
functionality
Instance Attributes (Instance #1)
Extended
# Name
1 Severity
2 Event Code
-
3
4 Slot
5 ADI
6 Element
7 Bit
Attributes #2 and #4–7 can not be represented on the network and are ignored by the module.
In this implementation, the severity level of all instances are combined (using logical OR) and represented on
the network through the CIP Identity Object.
Anybus CompactCom 40 EtherNet/IP Transparent Ethernet Network Guide
Get_Attribute
Create
Delete
Get_Attribute
Access Data Type
- -
Get UINT16
Get BITS32
Access Data Type
Get UINT8
Get UINT8
- -
Get UINT16
Get UINT16
Get UINT8
Get UINT8
Value
Consult the general Anybus CompactCom 40 Software Design
Guide for further information.
5+1 (Of the maximum number of instances there should always
be one instance reserved for an event of severity level 'Major,
unrecoverable', to force the module into the 'EXCEPTION'-
state.)
Bit 0: "0" (Latching events are not supported)
Bit 1 - 31: reserved (shall be "0" )
Value
Consult the general Anybus CompactCom 40 Software Design
Guide for further information.
Not implemented in product
Consult the general Anybus CompactCom 40 Software Design
Guide for further information.
61 (144)
SCM-1202-019-EN 1.6