Microscan MS-3 Manual Book page 87

Chapter 5
Separator Character (UPC/EAN)
Note: If Separator Character has been changed to any other character and you
wish to re-define the separator as a comma, you will need to use ESP or the embed-
ded menu.
Definition: Allows the user to change the separator character from a comma to a
new character.
Usage: As required by the application.
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator sta-
tus,separator
Default: , (comma)
Options: Any ASCII character
Note: Whenever Separator Character is defined as a comma (,) sending a
<K473,s ?> command will return the current settings including the separator charac-
ter comma which appears after the separator status comma.
Supplementals Type (UPC/EAN)
Definition: Allows the user to select 2 character or 5 character supplements, or
both.
Usage: As required by symbology used in application.
Serial Cmd: <K473, UPC status,EAN status,supplementals status,separator sta-
tus,separator
Default: Both
Options: 0 = Both
1 = 2 char only
2 = 5 char only
Both: Either 2 character or 5 character supplementals will be considered
valid.
2 Char Only: Only two character supplementals will be considered valid.
5 Char Only: Only five character supplementals will be considered valid.
MS-3 Laser Scanner User's Manual
character,supplementals type>
character,supplemental type>
Symbology
5-19