Microscan MS-3 Manual Book page 67

Chapter 4
Multisymbol Separator
Definition: The character that's inserted between each symbol scanned when Mul-
tisymbol is set to any number greater than 1.
Usage: Used to delimit or separate data fields with a user defined character.
Serial Cmd: <K222,number of
Note: If Multisymbol Separator has been changed to any character
other than the default comma and you wish to re-define the separator
as a comma, use the embedded menu.
Default: , (comma)
Options: Any available ASCII character, except
MS-3 Laser Scanner User's Manual
symbols,multisymbol separator>
< > NUL.
Read Cycle/Trigger
4-19