Microscan MS-3 Manual Book page 84

Interleaved 2 of 5
Symbol Length #2 (Interleaved 2 of 5)
Definition: Allows user to define a second symbol length for I–2 of 5.
Usage: If using a second symbol, a zero or any even symbol length from 2 to
64 may be specified. If not using a second symbol, set Symbol Length
#2 to 0 to ensure data integrity.
Serial Cmd: <K472, status,check digit status,check digit output,symbol length
#1,symbol length
Default: 6
Options: 2 to 64
Since I 2/5 characters are paired, symbol length must be set to an even
number. If Check Digit is enabled, add 2 to your symbol length. For
example, if your symbol is 10 characters plus a check digit, then enable
Symbol Length for 12.
Note: Typically, when printing an I 2/5 symbol with an odd number of
digits, a 0 will be added as the first character.
MS-3 Laser Scanner User's Manual
5-16
#2>