Microscan MS-3 Manual Book page 34

Auxiliary Port
Daisy Chain ID Status
Definition: Each scanner in a daisy chain can be assigned a one or two character
ID that will appear in front of decoded data and identify its source.
Usage: Used in a daisy chain setup in cases where the host needs to know
which scanner in a daisy chain setup sent the data.
Serial Cmd: <K101, aux port mode,baud rate,parity,stop bits,data
ID status,daisy chain ID>
Default: Disabled
Options: 0 = Disabled
Note: Enable/disable and length must be the same in all scanners.
Daisy Chain ID
Definition: A one or two character prefix which identifies the particular daisy chain
scanner from which the data is being sent.
Usage: Used in a daisy chain setup in cases where the host needs to know
which scanner sent the data.
Serial Cmd: <K101, aux port mode,baud rate,parity,stop bits,data bits,daisy chain
ID status,daisy chain
Default: 1/
Options: Any one or two ASCII characters.
MS-3 Laser Scanner User's Manual
2-14
1 = Enabled
ID>
bits,daisy chain