Heidenhain Make Linear Encoder (Linear Scale) (Abs Type) - Mitsubishi Melservo-J2-Super series Instruction Manual

2. LINEAR SCALES
2.1.2 Heidenhain make linear encoder (linear scale) (ABS type) Scheduled to be compatible
Specifications Reference Scheduled to be compatible
Contact Heidenhain for the specifications of this linear encoder (linear scale).
Heidenhain Sales Section No. 2: TEL. (03) 3234-7781
Item
Model
System
Effective measurement length
Resolution
Accuracy grade (20 )
Supply power voltage
Current consumption
Rated response speed
Maximum response speed
Operating temperature range
Storage temperature range
Dust tightness water tightness
Vibration resistance
Shock resistance
Required feeding force
Output signal
Output cable
Connection cable
Note 1. When the MR-J2SCLCBL02M-P-H is used, 367 425
2. The linear encoder (linear scale) is extremely sensitive to the operating temperature. When it exceeds 50 , an alarm may
occur. It is recommended to pay special attention to the operating temperature and secure the temperature change margins.
3. The battery (MR-BAT) is not required to configure an absolute position detection system.
Linear encoder (linear scale) unit structure Reference Scheduled to be compatible
Home position
Decreasing direction Increasing direction
IP53 (when mounted according to the manual of the Heidenhain make linear encoder)
337 439
Refer to the standard connection example in Chapter 3 and fabricate the cable.
(With the housing section fixed)
Specifications
LC491M
Photoelectric scanning system
70 to 2040mm
0.05 m
5 m
3 m (up to effective measurement length 1240)
5V 5% on the linear encoder side
Max.300mA
2.0m/s
2.0m/s
0 to 50 (non-freezing) (Note 2)
20 to 70 (non-freezing)
IP64 (when filled with compressed air)
100m/s (DINIEC 68-2-6) without mounting spur
2
150m/s (DINIEC 68-2-6) with mounting spur
2
150m/s (DINIEC 68-2-6) (11ms)
2
5N or less
Serial communication compatibility
(17 pin coupling), 367 425 0
(5m or less) can be connected directly.
2 - 9
(20 pins), etc. (Note 1)