Mitsubishi Melservo-J2-Super series Instruction Manual page 41

2. LINEAR SCALES
Linear encoder (linear scale) unit structure Reference
[When interpolator (MJ830) MODE switch = 5]
When PL101 or SL700 is used
SONY SL700
When SH13 is used
Note 1. Note that the increasing direction/decreasing direction of the linear encoder (linear scale) changes depending on the setting of
the interpolator (MJ830).
2. Always set an encoder (scale) home position (reference mark).
SONY
PL101R
Increasing direction Decreasing direction
Decreasing direction Increasing direction
SH13
2 - 22