Security Options Group - Digital Equipment DIGITAL Server 7100 1200 Service Maintenance Manual

Security Options Group

Menu Fields
Supervisor password
User password
Password on boot
Quick lock hot-key
Diskette access
Network server
System backup
reminder
Virus check reminder
(1)
Factory default setting
Settings Comments
(1)
Not installed Allows you to set a supervisor password.
Installed
If set, you will be prompted to enter a password prior to
accessing the SCU.
(1)
Not installed Can only be set in the condition that the Supervisor
Installed password is set. This password functions with
"Password on Boot" or "Quick Lock Hot-Key."
Enabled Enables or disables password entry on boot. If
(1)
Disabled enabled, the server will prompt you to enter the
password, either the User password or the Supervisor
password.
(1)
Disabled Enables or disables the Quick Lock function. When
Alt-Ctrl-F1 enabled, you can lock both the keyboard and PS2
through mouse by pressing the defined hot key, Alt-Ctrl-[key].
Alt-Ctrl-F12
During the lock state, if a user password is entered, the
keyboard and PS2 mouse will function again.
Supervisor If set to supervisor, the diskette can only be accessed
(1)
User if the server is booted via a supervisor password.
Otherwise, the diskette is free to be accessed.
(1)
Disabled When enabled, the server does not require a keyboard
Enabled to function and therefore, keyboard error messages
which might occur during POST will be ignored.
(1)
Disabled Allows you to display a backup reminder message at
boot (daily, every Monday, or the 1 st of every month).
Daily
Weekly
Monthly
(1)
Disabled Allows you to display a virus check reminder message
at boot (daily, every Monday, or the 1 st of every
Daily
Weekly month).
Monthly
SCU Features
3-9