Security Options Group - Digital Equipment 3100R Series Service Maintenance Manual

SCU Features

Security Options Group

Menu Fields
Supervisor
password
User password
Password on boot
Quick lock hot-key
Diskette access
Network server
System backup
reminder
Virus check
reminder
(1)
Factory default setting
3-10
Settings Comments
Not Allows you to set a supervisor password.
installed (1)
If set, you will be prompted to enter a
Installed
password prior to accessing the SCU.
Not Can only be set in the condition that the
installed (1)
Supervisor password is set. This password
Installed functions with "Password on Boot" or "Quick
Lock Hot-Key."
Enabled Enables or disables password entry on boot. If
Disabled (1)
enabled, the server will prompt you to enter the
password, either the User password or the
Supervisor password.
Disabled (1)
Enables or disables the Quick Lock function.
Alt-Ctrl-F1 When enabled, you can lock both the keyboard
through and PS2 mouse by pressing the defined hot
Alt-Ctrl-F12 key, Alt-Ctrl-[key].
During the lock state, if a user password is
entered, the keyboard and PS2 mouse will
function again.
Supervisor If set to supervisor, the diskette can only be
User (1)
accessed if the server is booted via a
supervisor password. Otherwise, the diskette
is free to be accessed.
Disabled (1)
When enabled, the server does not require a
Enabled keyboard to function and therefore, keyboard
error messages which might occur during
POST will be ignored.
Disabled (1)
Allows you to display a backup reminder
Daily message at boot (daily, every Monday, or the
1 st of every month).
Weekly
Monthly
Disabled (1)
Allows you to display a virus check reminder
Daily message at boot (daily, every Monday, or the
1 st of every month).
Weekly
Monthly