Scsi Select Utility - Digital Equipment DIGITAL Server 7100 1200 Service Maintenance Manual

Server Software and Utilities

SCSI Select Utility

The DIGITAL server comes with an Adaptec wide Ultra SCSI adapter and a
SCSI Select configuration utility. This utility allows you to change adapter settings
without opening the server.
Use SCSI Select to:
•
Check factory default settings for each device on the wide Ultra SCSI bus.
•
Change SCSI device settings that might conflict with other SCSI devices.
•
Perform low-level formatting on new wide Ultra SCSI disk drives.
To start the SCSI Select configuration utility:
Press [Ctrl] + [A] when the Adaptec BIOS banner appears during the boot process
and before the end of the device information display.
2-10
NOTE:
If you are configuring the server for Ultra SCSI, use the
SCSI Select
utility to enable Ultra SCSI data transfers.