The main logic board and processor module each contain memory where specific
information and System ID information is stored. The main logic board also stores
the server's System Asset number (see Figure 4-1).
Information is available for the server's main logic board and processor module (such
as part numbers, revisions, serial numbers, etc.). You can also assign Asset
numbers to these components. In addition, the software can detect when you
change the server configuration by adding or removing either component.
You can obtain information about the server's configuration by running the SCU or by
using ServerWORKS management software.
Asset#
Part#
Revision#
Serial#
Artwork#
System ID
Processor Module
Figure 4-1. DIGITAL Server Component Information
DIGITAL Server
7000 Series
(System ID)
Asset#
Part#
Revision#
Serial#
Artwork#
System ID
System Asset#
Main Logic Board
Troubleshooting
Asset#
Part#
Revision#
Serial#
Artwork#
System ID
Memory Module
DEC1409
4-7
Need help?
Do you have a question about the DIGITAL Server 7100 1200 and is the answer not in the manual?