Processor Module Upgrades
Troubleshooting
Using the Crisis Recovery Diskette if Necessary
If the BIOS is updated, the crisis recovery diskette may be used only if the server's
BIOS fails or if a BIOS upgrade is unsuccessful.
When using the Crisis Recovery diskette, remove any video option card and enable
the on-board SVGA.
1. Turn off the server and set SW1-2 on the main logic board to ON (Recovery
mode).
2. Insert the Crisis Recovery diskette into drive A and reboot the server.
6-18
NOTE: Remember to return switch SW1-2 to the Normal
position after using the Crisis Recovery diskette.
Need help?
Do you have a question about the DIGITAL Server 7100 1200 and is the answer not in the manual?