Setting The Dscp Value For Dhcpv6 Packets Sent By The Dhcpv6 Relay Agent; Specifying A Padding Mode For The Interface-Id Option - HP FlexNetwork MSR2003 Configuration Manual

Step
1. Enter system view.
2. Enter interface view.
3. Specify a DHCPv6 server.
Setting the DSCP value for DHCPv6 packets sent
by the DHCPv6 relay agent
The DSCP value of a packet specifies the priority level of the packet and affects the transmission
priority of the packet.
To set the DSCP value for DHCPv6 packets sent by the DHCPv6 relay agent:
Step
1. Enter system view.
2. Set the DSCP value for
DHCPv6 packets sent by
the DHCPv6 relay agent.
Specifying a padding mode for the Interface-ID
option
This function enables the relay agent to fill the Interface-ID option in the specified mode. When
receiving a DHCPv6 packet from a client, the relay agent fills the Interface-ID option in the mode and
then forwards the packet to the DHCPv6 server.
To specify a padding mode for the Interface-ID option:
Step
1. Enter system view.
2. Enter interface view.
3. Specify a padding mode for
the Interface-ID option.
Command
system-view
interface interface-type
interface-number
ipv6 dhcp relay server-address
ipv6-address [ interface
interface-type interface-number ]
Command
system-view
ipv6 dhcp dscp dscp-value
Command
system-view
interface interface-type
interface-number
ipv6 dhcp relay interface-id
{ bas | interface }
259
Remarks
N/A
N/A
By default, no DHCPv6 server is
specified.
If a DHCPv6 server address is a
link-local address or multicast
address, you must specify an
outgoing interface by using the
interface keyword in this command.
Otherwise, DHCPv6 packets might
fail to reach the DHCPv6 server.
Remarks
N/A
The default DSCP value is 56.
Remarks
N/A
N/A
By default, the relay agent fills the
Interface-ID option with the interface
index of the interface.