Emergency Stop Button Check - Trackmaster FVX325 Field Service Manual

TRACKMASTER
Serious injury or death could result from electric shock. To reduce the possibility of
electric shock, carefully observe the following precautions.
• Connect the treadmill only to a dedicated, properly grounded outlet. See "Grounding
Instructions" on the next page.
• Always unplug the treadmill from the electrical outlet before cleaning it.
• To disconnect the treadmill, set the power switch to the OFF position, and remove the
plug from the outlet. When the power is off, the green light next to the power switch is
dark.
•
Never operate the unit with a damaged power cord or plug.
•
Never operate the unit when it is wet.
•
Never operate the unit if it is not operating properly.
•
Never use extension cords.
•
Keep the power cord out of traffic areas and away from heated surfaces.
•
Always unplug the machine before service and maintenance are performed.
•
Never use the treadmill outdoors.
•
Operator should be aware of any shock when touching the treadmill and act accordingly.
•
Treadmill should be serviced by authorized technicians only.
•
Power cord should be routed through clamp and kept clear of elevation mechanism.
•
Personnel present when treadmill is in use need to be aware of the distinctive odor of hot
electrical components.
Serious injury or death could result from electric shock occurring during
defibrillation.
Never allow patient or operators near treadmill during defibrillation.
Before beginning any exercise program, check with your physician to
determine your present physical condition and capabilities regarding
aerobic exercise. Know your limits and requirements for warm-up, target,
and maximum heart and breathing rates; duration of exercise; cool-down
periods; and recovery heart rates. Stop exercising immediately if you feel
faint or dizzy, or if you experience symptoms of overexertion.
Serious injury or death could result from operating treadmill in the presence of
explosive or flammable vapors and antiseptics.

Emergency stop button check

With the belt moving at a relatively high speed, press the ESB. The treadmill will stop
(not abruptly), once stopped, turn the button clockwise to release.
Use the controlling equipment to terminate the exercise session and then turn off
treadmill.
August, 2006 FVX, TMX Series Service Manual
5-3