FVX325 Series Initial Setup and Assembly
FVX325 Series treadmills are shipped with handrail folded down for shipping.
Tools required for assembly
1. Rotate handrail to up right position.
2. Start 2~3/8-16 Socket head cap screw into lower legs.
3. Start 2~3/8-16 Socket head cap screw into upper handrail.
4. At this point tighten all 8~3/8-16 socket head.
Check unit for proper operation
If unit has no power check ESB (Emergency Stop Button) to assure the button
is not pressed.
To check unit for proper operation, perform Test Plug Procedure ref chapter 4-5
4-2
5/16 Allen wrench
FVX, TMX Series Service Manual
TRACKMASTER
August, 2006