Checkout Procedure
Perform appropriate checkout procedures before leaving treadmill.
1.
Increase and decrease speed from minimum to maximum using controlling unit
to verify operation.
2.
Raise and lower elevation from 0% to 25% using controlling unit to verify
operation.
3.
Depress emergency stop switch while unit is running at 3 m.p.h. to verify
operation.
4.
Monitor running belt tracking at 3 m.p.h. Adjust, if necessary, using procedure
in service manual.
5.
Verify speed calibration 1 m.p.h. = 8 revolutions in 60 seconds
6.
Verify elevation calibration. Adjust, if necessary, using procedure in service
Manual.
7.
Monitor drive belt for slipping, squeaking and misalignment. Adjust, if
necessary, using procedure in service manual.
Comments
Briefly describe all repairs/adjustments made and list all parts replaced:
Additional comments:
15-2
FVX, TMX Series Service Manual
TRACKMASTER
August, 2006