Operating Instructions; Electrical Safety Tests; Operating Controls; Controlling The Treadmill - Trackmaster FVX325 Field Service Manual

TRACKMASTER

Operating Instructions

Electrical safety tests

The Electrical safety of the installation is the responsibility of the customer, not
TRACKMASTER®. In hospitals, contact your in-house biomedical technician, electrician,
or technically qualified personnel. Outside of hospitals, contact your hospital affiliation for
these services. Otherwise contact Full Vision Inc. and open a customer-billable service call.
AC line voltage test to verify the outlet is properly wired.
Ground continuity test to verify all exposed metal is properly grounded.
Leakage tests to verify the equipment passes all applicable leakage tests.
Your in-house biomedical technician, electrician, or technically qualified personnel
can find instructions on performing these tests in the maintenance section later in this
manual.

Operating Controls

The treadmill has two operating controls, the power switch and the emergency stop
button.
The power switch controls the AC power to the treadmill. The on position
applies power. The off position removes power.
The Emergency stop button (ESB) is a safety device for use in emergency
situations to stop the treadmill. Push the ESB and the treadmill will stop, but the
belt will not lock. To release the ESB, turn the button clockwise and it will return
to its position.

Controlling the treadmill

Turn the power switch on (green light will come on).
Use the controlling system to start the treadmill, adjust the treadmill speed and grade,
proceed through the exercise phases, terminate the exercise session, and turn off the
treadmill.
August, 2006 FVX, TMX Series Service Manual
5
5-1