TRACKMASTER
Leeson Inverter
Leeson Speedmaster Self-Test
1.
Press the Mode button. Observe inverter readout displays 00.
2.
Press the up arrow and change readout value to 135.
3.
Press the Mode button, observe readout value should change to P01
4.
Press the up arrow and change the readout value to P05.
5.
Press the Mode Button, observe the readout value displayed is 03
6.
Press the down arrow and change the readout value to 01.
7.
Press the Mode Button twice. The readout should display P05.
8.
At the inverter terminal block, jumper pins 1 and 11 (white and violet wires). The
treadmill belt starts, pressing the up button will increase the speed of the running
belt, pressing the down arrow will decrease the speed of the running belt.
9.
To stop the belt, remove the jumper between pins 1 and 11 (white and violet
wires)
Return treadmill to normal operating mode.
10.
Press the Mode button. Observe inverter readout displays 00.
11.
Press the up arrow and change readout value to 135.
12.
Press the Mode button, observe readout value should change to
P01
13.
Press the up arrow and change the readout value to P05.
14.
Press the Mode Button, observe the readout value displayed is 01
15.
Press the down arrow and change the readout value to 03
16.
Press the Mode Button twice. The readout should display P05.
August, 2006
FVX, TMX Series Service Manual
11
11-1