Hood Removal Procedure TMX Series
Tools Required
1/4" Hex Socket or Flat Blade Screw Driver
1.
Turn the treadmill main power switch to the off position.
2.
Unplug the Treadmill from the wall receptacle.
3.
Allow treadmill to discharge for 3 minutes.
4.
Slide the hood grommets up the center handrail approximately 2'.
5.
Remove the three hood securing bolts on the lower front end of treadmill.
6.
Slide hood up treadmill center rail and force past the grommets, allow hood to hang from
grommets.
7.
Reverse procedure to reinstall hood.
8-2
FVX, TMX Series Service Manual
TRACKMASTER
August, 2006