TRACKMASTER
Removal and Replacement
of Components
Hood Removal Procedure FVX Series
Tools Required
1/4" Hex Socket or Flat Blade Screw Driver
1.
Turn the treadmill main power switch to the off position.
2.
Unplug the Treadmill from the wall receptacle.
3.
Allow treadmill to discharge for 3 minutes.
4.
Remove the three hood securing bolts on the front end of treadmill.
5.
Remove hood and set aside.
6.
Reverse procedure to reinstall hood.
August, 2006
FVX, TMX Series Service Manual
8
8-1