Trackmaster FVX325 Field Service Manual page 60

TRACKMASTER
5. Maximum Calibration Grade will appear in the Message Center with a default
setting of 25.00 in the Incline Window. This parameter sets the calibration grade
and does not limit elevation. For fitness units use numeric keypad and change to
15.00 and then press ENTER key. For medical units leave value at 25.0 and press
ENTER key.
Controller Action required
Display
Maximum Enter Max Cal
Calibration Grade using
Grade numeric keypad
6. Select Maximum Grade Then Press Enter will appear in the Message Center with
a default setting of 15.0 in the Incline window. Using the numeric keypad, change
to 25.00 for medical units. For fitness units use default of 15.0. Press ENTER key.
Controller Action Required
Display
Select Enter Maximum
Maximum Grade needed using
Grade then numeric keypad
Press Enter
7. Maximum Correction Factor will appear in the Message Center with a default
setting of 4 in the Speed window. Do Not Change This Number. Press ENTER key.
8. Speed Ratio will appear in the Message Center with a default setting of 3175. Do
not change this Number unless instructed to by the manufacturer. Press ENTER
key.
9. Cool Time will appear in Message Center with a default setting of 60 in the
Distance window. Parameter is used to set the Cool down time period/Press ENTER
key.
Controller Action Required
Display
COOL Enter Cool-down
TIME time desired
using numeric
keypad
10. No Limit will appear in the Message Center. This parameter is the fixed timer that
limits treadmill workout time. Parameter activates time limit entered in step 2. Press
ENTER key.
Controller Action Required
Display
No Limit Activate Time
Limit control by
using incline
arrow keys
August, 2006
Changes Parameter Options
Affect
Maximum 15 for 15% elevation
calibration fitness units
grade
25 for 25% elevation
medical units
Changes Parameter Options
Affect
Maximum 25 for 25%
Elevation elevation medical
Grade units
Changes Affect
Sets Cool-down
time period
Changes Affect
Activates
workout time
limit set in step 2
FVX, TMX Series Service Manual
Observe
Select Maximum
Grade then press
Enter appears in
Message Center
Observe
Maximum
Correction Factor
appears in
Message Center
Parameter Observe
Options
Timer range: No Limit appears
in Message
Center
0.01 seconds to
0.99 seconds
Parameter Observe
Options
Timer range: Serial H-rate
appears in
Message Center
1:00 minute to
99:00 minutes
5-29