Installing A 2.5-Inch Hdd / Ssd Dummy Module; Concluding Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

7.2.6.3

Installing a 2.5-inch HDD / SSD dummy module

V
CAUTION!
If the removed HDD / SSD module is not replaced immediately, always
replace a dummy module into the unused HDD / SSD bay to comply with
applicable EMC regulations and satisfy cooling requirements.
Figure 72: Installing a 2.5-inch HDD / SSD dummy module
Ê Slide the HDD dummy module into the drive bay until it locks in place.
7.2.6.4

Concluding steps

"Installing accessible drive and HDD bay covers" on page 69
Ê
TX2540 M1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
151