Priming The Needle Wash Pump - Waters 717plus Operator's Manual

3.5 Priming the Needle Wash Pump

To prime the needle wash pump:
1. Ensure that the needle wash supply line (green) is in the solvent bottle and the
waste line (yellow) is in an appropriate container.
2. To prime the needle wash, press the keys outlined in the flowchart below
(Figure 3-7).
3. If, after 30 seconds, the solvent does not flow out of the waste line, press
NdlWash
Menu Page
Menu: Diagnostic
Menu: User
Maintenance
NdlWash
Page
Prime Needle
Wash Page
Start
NdlWash
Figure 3-7 Priming the Needle Wash Pump
again.
Diag
Page
UserMaint
Page
T P 0 1 9 4 5
Startup and Configuration
3
Start
64