Table of Contents
Advertisement
Electrical Installation:
1. Plug the power jack from the supplied wall transformer into the connector
labeled "POWER" and plug the wall transformer into the proper wall outlet.
The green LED on the front of the unit will turn on.
2. Insert the RJ45 cable included in the shipment from the host Computer into
the RJ45 connector marked "PC".
3. Using RJ45 cable, plug the each Recorder, (maximum 8) into any one of the
RJ45 connectors labeled 1,2,3,4,5,6,7, or 8. A TimeTrax Recorder must be
inserted into the connector marked 1 when any clock is included in the
system so the clock receives a time signal.
4. Open the TimeTrax Program. The Initial Communication Screen will indicate
the proper connections.
To Connect With Multiple Clocks, Bells and Terminals:
BuyOnlineNow.com
TIME & ATTENDANCE SYSTEM
61
Advertisement
Table of Contents
Troubleshooting
