Table of Contents
Advertisement
8. Note: Time Recorders are going to be activated one-at-a-time! Power up
the next Ethernet Time Recorder Terminal with its power cord and adapter
(as was done for the first Time Recorder in Step 4) and let it run for at least 3
minutes. Click the RECONNECT button. Confirm that the recorder appears
in the Initial Time Recorder Connection Form.
9. Repeat Step 8 for each additional TimeTrax Time Recorder.
10. Once all recorders have been powered up and found, your TimeTrax system
is ready for normal use. Click the OK (Continue) button on the Initial Time
Recorder Connection Form to proceed.
BuyOnlineNow.com
TIME & ATTENDANCE SYSTEM
59
Advertisement
Table of Contents
Troubleshooting
