Pyramid TimeTrax pro Reference Manual page 58

Installing Remote Recorder(s) and Modem(s) (See diagram on page 49)
TimeTrax Time Recorders installed at remote locations must be connected to a
phone line through a Pyramid Model 5050 external modem or installed directly
to the TimeTrax Time Recorder if it was purchased with an internal modem.
If connecting to 5050 Modem, plug the supplied RJ-11 phone cable into the
port labeled PHONE LINE and plug the other end into the analog phone
outlet designated for the TimeTrax Recorder.
Attach the modem to the TimeTrax Time Recorder by plugging the RJ-45 flat
cable into the port on the modem labeled TIME CLOCK. Make sure the connec-
tor "clicks" into place. Attach the cable from the supplied 18vac transformer to
the modem port labeled POWER IN. Plug the transformer into a wall outlet or
surge protector (recommended). When power is supplied to the modem, the
LEDs labeled POWER and READY will light up.
If connecting to TimeTrax with internal modem, connect the RJ-11 phone cable
into the port labeled Phone line and the other end into the analog phone outlet
designated for the TimeTrax Recorder. Plug the transformer into a wall outlet or
surge protector (recommended). When power is supplied to the modem, the
LEDs labeled POWER and READY will light up.
Activating the Modem Polling Feature
To activate your Modem Polling Feature, from the TimeTrax Toolbar, select
UPGRADES and then FEATURES. Highlight Modem Polling Option and select
INSTALL FEATURE: MODEM POLLING OPTION.
BuyOnlineNow.com
TIME & ATTENDANCE SYSTEM
Highlight MODEM
POLLING Option
Select: INSTALL FEATURE
To get a key, call
Pyramid Customer
Support at 888-479-7264.
Enter Key to unlock the
feature and select
VALIDATE.
51