Bell Schedules - Pyramid TimeTrax pro Reference Manual

TIMETRAX PRO

BELL SCHEDULES

TimeTrax accommodates bell scheduling for customers who have standard
start/end and break/lunch times and want to program bells to ring at a specific
time to notify employees at the appropriate hour, up to 300 events. The pro-
gramming is standard in the software, however, additional bell ringing hardware
and bells are available through Customer Support at 888-479-7264 or by email
at custsvc@pti.cc.
To program the bell schedule, your time recorder must be connected successfully
to your PC on the Initial Communications screen of the software. Select BELL
SCHEDULE from the Vertical Icon Bar.
To program the bell to ring, select ADD. In the time field, use the up and down
arrows to choose the time that you want the bell to ring and in the duration
field, choose the duration of the ring. Durations are 0.5 seconds, 1.0 seconds
and in 1 second increments up to a maximum of 15 seconds. Select the days of
the week that you want the bell to ring.
Circuits: The circuit selection indicates which circuits are to ring at the
designated time. The Time Recorder, connected to the Pyramid 5300 bell ringer,
will automatically be Circuit 1. With the Pyramid 5110 Bell Ringer Relay, you
can connect up to four independent bell circuits that can ring individually or
simultaneously with one another.
Save and repeat steps for each time that you want the bell to ring throughout
the day.
20
BuyOnlineNow.com
Enter the time that you want the
bell to ring.
Select the duration of the ring
from .5 to 15 seconds.
Select days of the week that bell
should ring.