Table of Contents
Advertisement
SQL HARDWARE INSTALLATION
IMPORTANT: Software must be fully installed PRIOR to connecting the hardware.
1. Install SQL Server CD onto the PC that will act as the Server.
Close out of the program.
2. Install DB9 and USB adapter to the computer that will act as the Server.
3. Attach the RJ45 cable to the DB9 adapter.
4. Run the cable to the terminal.
5. Install SQL Client disk on all PCs that will run TIMETRAX program.
When upgrading to SQL From A Single User Version, or changing computers
and you are using a USB interface with standard RS232 adapter, you must
disconnect the adapter prior to installing the SQL Server CD. If you run the
installation program with the USB connected, the software will not be able to
locate the time recorder(s). If this happens, you must disconnect the adapter,
uninstall the software, reinstall the software and then connect the hardware
for the software to successfully locate the recorders.
*Note: When using serial TimeTrax terminals, only the computer that has
the TimeTrax attached can download the punches. When using
ethernet TimeTrax terminals all computers can download the punches.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE
ATTEMPTING THE INSTALLATION. ALSO PLEASE KEEP YOUR CDs IN
A SAFE LOCATION FOR FUTURE ACCESS TO THE SUPPORT FOLDER.
BuyOnlineNow.com
TIME & ATTENDANCE SYSTEM
39
Advertisement
Table of Contents
Troubleshooting
