Siemens SINAMICS S110 Manual page 6

Preface
Usage phases and their documents/tools (as an example)
Table 1
Orientation
Planning/configuration
Deciding/ordering
Installation/assembly
Commissioning
Usage/operation
Maintenance/servicing
Target group
This documentation is intended for machine manufacturers, commissioning engineers, and
service personnel who use the SINAMICS drive system.
Benefits
This manual provides all of the information, procedures and operator actions required for the
particular usage phase.
Standard scope
The scope of the functionality described in this document can differ from that of the drive
system that is actually supplied.
● Other functions not described in this documentation might be able to be executed in the
drive system. However, no claim can be made regarding the availability of these functions
when the equipment is first supplied or in the event of service.
● The documentation can also contain descriptions of functions that are not available in a
particular product version of the drive system. The functionality of the supplied drive
system should only be taken from the ordering documentation.
● Extensions or changes made by the machine manufacturer must be documented by the
machine manufacturer.
6
Usage phase and the available tools / documents
Usage phase
SINAMICS S Sales Documentation
SIZER configuration tool
Configuration Manuals, Motors
SINAMICS S Catalogs
SINAMICS S110 Manual
•
STARTER commissioning tool
•
SINAMICS S110 Getting Started
•
SINAMICS S110 Function Manual Drive Functions
•
SINAMICS S110 List Manual
•
SINAMICS S110 Function Manual Drive Functions
•
SINAMICS S110 List Manual
•
SINAMICS S110 Function Manual Drive Functions
•
SINAMICS S110 List Manual
•
SINAMICS S110 Manual
•
Tools/documents
Manual, 07/2015, 6SL3097-4AC10-0BP5
SINAMICS S110