Supplementary system components and encoder system integration
8.1 Basic Operator Panel BOP20
8.1.3
Installation
NOTICE
Damage to the interface for the BOP20 at the Control Unit through tilting
If the BOP20 is skewed when inserting or withdrawing it, this can damage the interface for
the BOP20.
• Make sure that you insert and withdraw the BOP20 straight into/out of the Control Unit
Mounting
The photographs show how to mount the Basic Operator Panel BOP20 on a CU305.
1. BOP20 and Control Unit CU305
168
and that it is not tilted up or down.
2. Press the latching cams of the cover together simultane-
ously.
Manual, 07/2015, 6SL3097-4AC10-0BP5
SINAMICS S110