Loading An Existing Job From The Free Memory; Resetting An Existing Job To The Factory Setting (Reset Job) - EWM TETRIX 1002 DC SYNERGIC Operating Instructions Manual

Functional characteristics
Organising welding tasks (Mode "JOB Manager")
5.6.3

Loading an existing JOB from the free memory

Operating Action
element
x x
VOLT
JOB
PROG
2 sec.
VOLT
JOB
PROG
1 x
VOLT
JOB
PROG
5.6.4

Resetting an existing JOB to the factory setting (Reset JOB)

Operating Action
element
x x
VOLT
JOB
PROG
2 sec.
VOLT
JOB
PROG
2 x
VOLT
JOB
PROG
1 x
VOLT
JOB
PROG
36
Result
Select JOB Manager mode
Select JOB Manager mode
Select the required JOB number using the rotary
transducer (e.g. 150)
JOB loaded, machine switches back to Display
mode.
The JOB can be customised as required.
Result
Select JOB Manager mode
Select JOB Manager mode
Switch from "Load JOB" to "Reset JOB"
Select the required JOB number using the rotary
transducer (e.g. 150)
JOB reset to factory settings, machine switches
back to Display mode.
Display
Press until the "VOLT"
signal light is on
Current value and JOB
number displayed
Display
Press until the "VOLT"
signal light is on
Current value and JOB
number displayed
Item No.: 099-000155-EWM01