Loading An Existing Job From The Free Memory; Resetting An Existing Job To The Factory Setting (Reset Job) - EWM Tetrix 352 AC/DC SYNERGIC PL. AW GR Operating Instructions Manual
Power sources for automated applications
Hide thumbs
Also See for Tetrix 352 AC/DC SYNERGIC PL. AW GR:
- Operating instructions manual (53 pages) ,
- Operating instructions manual (92 pages)
Table of Contents
Advertisement
Design and function
Organising welding tasks (Mode "JOB Manager")
5.20.3 Loading an existing JOB from the free memory
Operating
Action
element
x x
2 sec.
1 x
5.20.4 Resetting an existing JOB to the factory setting (Reset JOB)
Operating
Action
element
x x
2 sec.
2 x
1 x
66
Result
Select JOB Manager mode
Select JOB Manager mode
Select the required JOB number using the rotary
transducer (e.g. 150)
JOB loaded, machine switches back to Display
mode.
The JOB can be customised as required.
Result
Select JOB Manager mode
Select JOB Manager mode
Switch from "Load JOB" to "Reset JOB"
Select the required JOB number using the rotary
transducer (e.g. 150)
JOB reset to factory settings, machine switches
back to Display mode.
Display
Press until the "VOLT"
signal light is on
Current value and JOB
number displayed
Display
Press until the "VOLT"
signal light is on
Current value and JOB
number displayed
099-003133-SCO01
07.04.2014
Advertisement
Table of Contents
Need help?
Do you have a question about the Tetrix 352 AC/DC SYNERGIC PL. AW GR and is the answer not in the manual?
Questions and answers