Resetting Jobs 1-128 To The Factory Setting (Reset All Jobs); Exit Job Manager Without Changes - EWM TETRIX 1002 DC SYNERGIC Operating Instructions Manual

5.6.5

Resetting JOBs 1-128 to the factory setting (Reset All JOBs)

Operating Action
element
VOLT
JOB
PROG
VOLT
JOB
PROG
VOLT
JOB
PROG
VOLT
JOB
PROG
5.6.6

Exit JOB Manager without changes

The user is in the JOB manager menu and wants to exit without making any changes:
Operating Action
element
2 sec.
VOLT
JOB
PROG
Item No.: 099-000155-EWM01
Result
Select JOB Manager mode
x x
Select JOB Manager mode
2 sec.
Switch from "Load JOB" to "Reset All JOBs"
3 x
• ON = Reset all JOBs to factory settings
• OFF = Do not reset JOBs
All JOBs reset to factory settings, machine
1 x
switches back to Display mode.
Result
Machine switches back to Display mode
The JOB can be adjusted individually.
Functional characteristics
Organising welding tasks (Mode "JOB Manager")
Display
Press until the "VOLT"
signal light is on
Current value and JOB
number displayed
Display
Current value and JOB
number displayed
37