Select Welding Task - EWM TETRIX 1002 DC SYNERGIC Operating Instructions Manual

Functional characteristics
TIG Synergic operating principle
5.2.3

Select welding task

The welding task is selected using the buttons on the machine control on the welding machine.
Signal lights (LED) display the welding parameter selection.
It is only possible to change the 3 basic welding parameters if:
• No welding current is flowing and
• The key switch (option) is set to position "1".
Operating
element
1,0
1,6
2,0
2,4
3,2
4,0
>
26
Action Result
Select and display welding process
Select and display seam type
Select and display material type
Select and display "electrode diameter" / "ignition
optimisation"
Select and display operating mode
NOTE
Displays
-
-
-
-
-
Item No.: 099-000155-EWM01