Table of Contents
Advertisement
Installation manual
About This Manual
Purpose
The purpose of this manual is to describe the Ingecon
tion required for its correct operation, from reception to start-up, in addition to the preventive maintenance during
operation.
Scope
This manual provides safety guidelines, equipment information and requirements and procedures for installation and
operation.
Audience
Any installer who plans to use our equipment in a PV installation according to the requirements of the "National
Electrical Code. ANSI/NFPA70" and any other local codes or laws. The installer itself must meet all local and state
code requirements.
Scheme
Please read this manual carefully and follow the installation instructions precisely.
Symbol Identifications in this Manual
The following symbols are used in this manual:
WARNING
Warnings advise about situations that could cause personal injury or death.
CAUTION
Cautions advise about situations that could cause damage to the unit or the environment.
Important safety instructions
This manual contains important instructions for models:
•
Ingecon
Sun 3.6TL U
®
•
Ingecon
Sun 5 U
®
•
Ingecon
Sun 5TL U
®
•
Ingecon
Sun 6TL U
®
that shall be followed during installation and maintenance of the Ingecon
Save these instructions. Do not discard.
WARNING
The operations detailed below should only be carried out by suitably qualified personnel, trained to
work with electrical equipment, familiar with this manual and the electrical drawings associated with
the control panel (hereinafter referred to as qualified personnel). You are reminded that it is compul-
sory to comply with applicable legislation in terms of security for electrical work. There is an electrical
discharge hazard.
It is essential to read the manual before operating the equipment.
AAY2000IKI02
Sun 5 U and Ingecon
Sun 5TL U and to provide the informa-
®
®
Sun U.
®
Ingeteam Inc
iii
Hide quick links:
Advertisement
Table of Contents
