Configuration; Country/Normative - Ingeteam Ingecon Sun 3.6TL U Installation Manual

Installation manual
Screen 5
Part E Total energy (kWh) delivered by the inverter to the Power grid since the last counter reset.
Tp con The number of hours that the inverter has been connected to the Power grid since the last counter
reset.
Npcon
The number of grid connections made since the last counter reset.
Screen 6
FW Ver Inverter firmware version.
DFWVer
Inverter display firmware version.
D. Boot Firmware boot version.

9.5. Configuration

Enables verification of certain parameters for which the inverter has been configured. Access restricted to installer.
Press on the Configuration option in the Main menu. Giving access to the following screen:
17:32 17:32
Configuration Configuration
CAUTION
Do not change any of these parameters if you are not the installer and you are not completely sure.
Ingeteam Inc accepts no liability for damage to the unit or the installation due to configuration
changes.
The menu will display only the configurations corresponding to the device hardware.
The various available configuration changes are described below.

9.5.1. Country/Normative

17:32 17:32
Country/Normative Country/Normative
In this equipment this setting is not configurable.
AAY2000IKI02
30/04/12 30/04/12
30/04/12 30/04/12
17:32 17:32
17:32 17:32
Ingeteam Inc
30/04/12 30/04/12
30/04/12 30/04/12
59