Table of Contents
Advertisement
Ingeteam Inc
European pallet packaging
First row
Second row
Third row
Fourth row
Fifth row
Overall
Damage during transport
Should the inverter sustain damage during transport:
1.
Do not install it.
2.
Immediately notify your distributor of this situation within a 5 day period from the reception date.
Should it be finally necessary to return the equipment to the manufacturer, the original packing should be used.
Packaging disposal
All the packaging can be given to an authorised non hazardous waste manager.
In any case, each part of the packaging should be disposed of as follows:
•
Plastic (polystyrene, bag and bubble wrap): the appropriate container.
•
Cardboard: the appropriate container.
3.2. Handling
It is exceedingly important to correctly handle the inverters at all times, in order to ensure that:
•
The packaging remains intact and the inverters are maintained in optimum condition right from shipment
until unpacking.
•
The inverters are not knocked and/or dropped, which could affect their mechanical characteristics, such as
poor door closure, loss of NEMA rating etc.
•
Every effort is made to avoid vibrations, which could lead to subsequent malfunctioning.
Should any anomaly be observed, Ingeteam Inc must be contacted immediately.
3.3. Transport
Correct inverter transport and storage are the first steps required for correct use and operation. Considering the indi-
cations given in section "3.2. Handling", and as a preventive measure, Ingeteam Inc would recommend working with
haulers specializing in the transport of special and/or fragile equipment. All equipment packed in accordance with
section "3.2. Handling" must be handled with tools that will not damage the packaging.
During transport and storage the equipment should be protected from mechanical impacts, vibrations, water projec-
tions (rain) and any other product or situation which could damage or alter its performance.
When moving the equipment over a distance of more than 16.4 ft (5 m), a pallet jack or fork-lift truck should be used,
whenever possible.
Moving the equipment with a pallet jack
At least the following points should be observed:
•
Ensure that the packed equipment is centred over the forks.
•
Try to ensure that the equipment is positioned as close as possible to the connection between the fork and
handle.
•
In any event, observe the instructions provided in the pallet jack manual.
20
Ingecon
Sun 5 U
®
4 connection boxes
4 connection boxes
2 connection boxes
2 inverters
4 inverters
4 inverters
10 complete equipment
Ingecon
Sun 3.6TL U, 5TL U and 6TL U
®
4 inverters
4 inverters
4 inverters
6 connection boxes
6 connection boxes
12 complete equipment
Installation manual
AAY2000IKI02
Hide quick links:
Advertisement
Table of Contents
