Power Meter Operation
Setting the Resolution
Setting the Resolution
The resolution of each of the power meter's windows can be set to four
different levels (1, 2, 3 or 4).
These four levels represent:
•
1, 0.1, 0.01, 0.001 dB respectively if the measurement suffix is
dBm or dB.
•
1, 2, 3 or 4 significant digits respectively if the measurement suffix
is W or %.
The default value is 0.01 dB (3 digits).
To set the resolution on the currently selected window:
Meas
1. Press
. The current setting of the resolution is highlighted
Setup
on the
Resolution 1 2 3 4
2. To change this setting press
required resolution setting is highlighted.
2-38
softkey.
Resolution 1 2 3 4
Agilent E4419B User's Guide
until the