Channel Measurements - Agilent Technologies E4419B User Manual

Power Meter Operation

Channel Measurements

Channel Measurements
Single channel measurements can be made on the currently selected
window by pressing
Absolute power is displayed for the selected channel in either dBm or
Watts. The filter, range (where applicable), offset, duty cycle, calibration
factor and limits can be set for the selected channel.
Single channel measurements can be displayed relative to a stored
reference. In relative mode readings are displayed in either dB or %. Refer
to "Making Relative Measurements", on page 2-37 for further information.
2-52
Meas
,
Input Select
Setup
and selecting or .
A B
Agilent E4419B User's Guide