reference number in the left-hand column to look up Table 1-2 for
the combination of sensor type and correction being applied to the
current measurement.
For example, the display shows:
This is equivalent to reference number 4 in Table 1-1 and when
looked up in Table 1-2 shows that:
• the sensor type is 8480 series
• a sensor calibration table is selected (10)
• a frequency dependent offset table is selected(C).
Reference
Number
1
2
3
4
5
6
Where "y" is the frequency multiplier (M or G), "nn" is the
sensor calibration table number and "a" is the frequency
dependent offset table letter.
Agilent E4419B User's Guide
50MHz
(10,C)
Table 1-1
Upper
Display Line
Display Line
CF:xxx.x%
CF:xxx.x%
xxx.xyHz(a)
xxx.xyHz
(nn)
xxx.xyHz
(nn,a)
xxx.xyHz
xxx.xyHz
(a)
Getting Started
The Display Layout
Lower
1-9