SuperStorage Server 6048-E1CR90L User's Manual
1.4 Chassis Views
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
Item
Features
1
Power button
2
UID button/LED
3
Power LED
4
HDD LED
5
NIC LED
6
NIC LED
7
Information LED Alerts operator to several states, as noted in the table below
1
2
3
4
5
6
7
Figure 1-1. Control Panel
Control Panel Features
Description
The main power switch applies or removes primary power from the power supply to
the server but maintains standby power.
The uinit identification (UID) button turns on or off the blue light function of the
Information LED and a blue LED on the rear of the chassis. These are used to
locate the server in large racks and server banks.
Indicates power is being supplied to the system power supply units. This LED is
illuminated when the system is operating normally.
Indicates HDD activity
Indicates network activity on the LAN when flashing.
Indicates network activity on the LAN when flashing.
10