Power Configuration - Supermicro SuperStorage Server 6048R-E1CR90L User Manual

SuperStorage Server 6048-E1CR90L User's Manual
AddOn ROM Display Mode
Use this item to set the display mode for the Option ROM. Select Keep Current to use the
current AddOn ROM display setting. Select Force BIOS to use the Option ROM display mode
set by the system BIOS. The options are Force BIOS and Keep Current.
Bootup Num-Lock State
Use this item to set the Power-on state for the Numlock key. The options are Off and On.
Wait For 'F1' If Error
Select Enabled to force the system to wait until the <F1> key is pressed when an error occurs.
The options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this item is
set to Immediate, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup
immediately and allow the drives that are attached to the host adaptors to function as bootable
disks. If this item is set to Postponed, the ROM BIOS of the host adaptors will not capture
Interrupt 19 immediately to allow the drives attached to the adaptors to function as bootable
devices at bootup. The options are Immediate and Postponed.
Re-try Boot
Select EFI Boot to allow the BIOS to automatically reboot the system from an EFI boot device
after the initial boot failure. Select Legacy Boot to allow the BIOS to automatically reboot
the system from a Legacy boot device after its initial boot failure. The options are Disabled,
Legacy Boot, and EFI Boot.

Power Configuration

Watch Dog Function
Select Enabled to allow the Watch Dog timer to reboot the system when it is inactive for more
than 5 minutes. The options are Enabled and Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override for the system to power off after the user presses and holds the power
button for 4 seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are 4 Seconds Override and Instant Off.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power Off for
the system power to remain off after a power loss. Select Power On for the system
power to be turned on after a power loss. Select Last State to allow the system
to resume its last power state before a power loss. The options are Power On,
Stay Off, and Last State.
74