Table of Contents
Advertisement
Note: Do not interrupt this process until BIOS flashing has completed.
9. After receiving the message that the BIOS update is complete, unplug the AC power
cable from the power supply to clear CMOS, then plug the AC power cable in the power
supply again to power on the system.
10. Press <Del> continuously to enter the BIOS Setup utility.
11. Press <F3> to load the default settings.
12. After loading the default settings, press <F4> to save the settings and exit the BIOS
Setup utility.
Appendix C: UEFI BIOS Recovery
135
Advertisement
Table of Contents
